PDA

View Full Version : Timeslips for Trophies Reminder!!!



ironsport1000
12-01-2014, 11:13 PM
Just a reminder to anybody that has posted up a time slip or is planning to post one up, time is running out.
All time slips must be posted no later than December 15th.

Here are the rules just as a reminder.
http://www.dakotart.com/forum/showthread.php?t=29423

Classes.
http://www.dakotart.com/forum/showthread.php?t=13219

I will post up the ET list January 1st and announce the winners too!

Good luck to everybody. :biggthumpup:

madboy
12-06-2014, 11:58 AM
Just a reminder to anybody that has posted up a time slip or is planning to post one up, time is running out.
All time slips must be posted no later than December 15th.

Here are the rules just as a reminder.
http://www.dakotart.com/forum/showthread.php?t=29423

Classes.
http://www.dakotart.com/forum/showthread.php?t=13219

I will post up the ET list January 1st and announce the winners too!

Good luck to everybody. :biggthumpup:

Jim is there only a FIRST place trophy?

Looks like I might be third in Heavy N/A ... @ my 12.90

Adobedude
12-06-2014, 01:13 PM
:fml:

ironsport1000
12-06-2014, 01:14 PM
Jim is there only a FIRST place trophy?

Looks like I might be third in Heavy N/A ... @ my 12.90


:fml:

I wish guys. :jester:

madboy
12-06-2014, 01:21 PM
I wish guys. :jester:

Hmmm decisions decisions for 2015... likely have to wait until 2016 to make a run at it again :fml: :secret squirrel:

Adobedude
12-06-2014, 02:15 PM
I'll have to move to keep up with the -DA guys.

madboy
12-06-2014, 02:20 PM
I'll have to move to keep up with the -DA guys.

More cam / heads / carb - FTW!! You can do it dude!! :biggthumpup:

krs1r/t
12-06-2014, 02:32 PM
I'll have to move to keep up with the -DA guys.

What? Can't take out any more weight?:idunno:
Your truck probably is 1000 lbs lighter then mine!
How much e.t is taking out a 1000 lbs?

Adobedude
12-06-2014, 03:18 PM
What? Can't take out any more weight?:idunno:
Your truck probably is 1000 lbs lighter then mine!
How much e.t is taking out a 1000 lbs?

It's said a 100lbs = a tenth, so you would be 10.28

And my 11.29 "corrects" to 10.50.

I could make up the diff on the tree. :biggthumpup:

madboy
12-06-2014, 03:20 PM
It's said a 100lbs = a tenth, so you would be 10.28

And my 11.29 "corrects" to 10.50.

I could make up the diff on the tree. :biggthumpup:

Are you really 1000#'s lighter :idunno:

Inconceivable... :bored_work:

Adobedude
12-06-2014, 03:34 PM
Are you really 1000#'s lighter :idunno:

Inconceivable... :bored_work:

I had it scaled. With the stock steering, dash and EFI wiring cluster fuck it was 3292 without me.

Since then its lost the stock steering/dash/EFI wiring cluster fuck. Stock harness was 60 lbs, dash & steering...Maybe another 100? It might be under 3150 now.

What's a stock Dakota weigh 4200 lbs?

Only way to lose more lbs is to spend some serious money. :nono:

Adobedude
12-06-2014, 03:36 PM
Tin Can 2.0

madboy
12-06-2014, 03:43 PM
Tin Can 2.0

I know your a tin can but i just cant see 1000# in weight loss...

I was right about 4k with me in it on the scales at the Mini meet in Cali - Regular cab with AC and im about $1.90 - i have heard of regular cabs over 4k without driver but i have a hard time believing it.

Adobedude
12-06-2014, 04:03 PM
I know your a tin can but i just cant see 1000# in weight loss...

I was right about 4k with me in it on the scales at the Mini meet in Cali - Regular cab with AC and im about $1.90 - i have heard of regular cabs over 4k without driver but i have a hard time believing it.

4 wheel digital scales FTW. Not some truck stop scales.

The rear weight with the battery centered in the bed behind the fuel cell, with me in it, was 792 drivers, 706 passenger.

After that I moved the battery to the passenger side and moved the fuel cell back about 8".

FYI...weights with me were: 939 driver front, 1040 passenger front.

56.79% front
43% Rear

blackrt32
12-06-2014, 05:15 PM
My rc is #3920 with me in it and bogart street wheel

krs1r/t
12-06-2014, 05:17 PM
It's said a 100lbs = a tenth, so you would be 10.28

And my 11.29 "corrects" to 10.50.

I could make up the diff on the tree. :biggthumpup:

You probably would :biggthumpup:

The tin canage looks great too by the way:hail:

Adobedude
12-06-2014, 06:19 PM
You probably would :biggthumpup:

The tin canage looks great too by the way:hail:

Thanks, I gotta admit, it was a little strange doing it at first...Never turned anything into a Tin Can before, but now I don't look at as being anything but a time slip. :biggthumpup:

krs1r/t
12-06-2014, 07:37 PM
Thanks, I gotta admit, it was a little strange doing it at first...Never turned anything into a Tin Can before, but now I don't look at as being anything but a time slip. :biggthumpup:

A little off topic but, you have 10,000 more posts then me. And only a years difference in join date.
























Post Whore!:jester:

madboy
12-06-2014, 08:58 PM
A little off topic but, you have 10,000 more posts then me. And only a years difference in join date.
Post Whore!:jester:

At least he's faster at something :jester:

krs1r/t
12-06-2014, 10:27 PM
At least he's faster at something :jester:

:lol2:

madboy
12-06-2014, 10:38 PM
At least he's faster at something :jester:


I love Dave and his truck BTW - as much as 2 heterosexual Internet part exchanging bench racing men can love eachother that is :secret squirrel:

Duner
12-06-2014, 11:01 PM
I feel jilted.