Atco 9/18/08

[BryanRT360]

I'm going to Atco on Thursday if anybody wants to join. should be there around 5-530. Going for a new best, gotta new set of slicks and i just about got my SCT dialed in.:rockwoot:

[RTchas]

HHMMMMMMMMMMMM not ready with the R/T but charger could go???

[bad360rt]

Good luck guys! :biggthumpup:

One day I'll race at Atco again, I miss it.

[BryanRT360]

HHMMMMMMMMMMMM not ready with the R/T but charger could go???

hows the blower working out for you? did you get the ac line fixed? I'll bring mine with me if you wanna match it up with yours? mines an 02' so it might be different. also if you get an 02 bung welded in you use my lm-2 to get yor A/F dialed in.

[RTchas]

hows the blower working out for you? did you get the ac line fixed? I'll bring mine with me if you wanna match it up with yours? mines an 02' so it might be different. also if you get an 02 bung welded in you use my lm-2 to get yor A/F dialed in.

Well,(long story) after ride down Del. I found out I did not have full throttle so on Sun I cut the bracket on the F&B to clear the air hat. I had to remove the corner of the throttle bracket with the small plastic guide for gas pedal cable.This has made full throttle possible but now pedal is hard as shit! I don't like it! But gota get use to it I guess(shrug).I only took it around the block and wasn't getn Boost I think no air hat gasket caused that so I picked one up thru it on and haven't been out yet to see what's up.I will have to get a bung and get the A/F logged might take you up on that one.. I wanna go Thurs but with work and wife I dunno I would love to fix the AC but $$ its getting cold and I need $ for A/F gauge and a mount for that and boost gauge...Priorities ya know:D On a pos note one Nitto came today and is on the truck other is due noon thurs WTF Fedx! And I got the pre-:biggthumpup:magnum Mopar Performane covers I told ya about on Craigslist for $30 never used!! More work to do..

[RTchas]

Good luck guys! :biggthumpup:

One day I'll race at Atco again, I miss it.

You home?

[BackRoadsR/T]

You home?

id come but my tranny is pretty much shot after tonights test and tune. i did pull off a 14.18@103 though :jester:

[bad360rt]

You home?

Nope, out on the USS Roosevelt at the moment. Sorry, I didn't get the stuff pulled out before I left. I had just got the truck back and then only had a few days before I left on this trip, and we were still repainting the upstairs. I should be home in a few weeks, I'll get that stuff to you as soon as I get back, if you still want it. :biggthumpup:

[bad360rt]

id come but my tranny is pretty much shot after tonights test and tune. i did pull off a 14.18@103 though :jester:

Nice mph! Must have been a horrible 60', that's a solid mid 13sec mph, with traction of course. :D

[BryanRT360]

well only got 3 runs in. New best on motor no new best on n20. My LSD is SHOT!!! it a one legger. so my 60's sucked.

on motor
60'- 2.076
1/4- 14.1
mph- 97

100 shot
60-1.94
1/4- 12.8
mph- 106.3

I ran 12.8's before but with a 1.7 60'. So when I rebuild my lsd I should get those 60's down to at least a 1.7 or better. should be able to run 12.5's or better.

[RTchas]

well only got 3 runs in. New best on motor no new best on n20. My LSD is SHOT!!! it a one legger. so my 60's sucked.

on motor
60'- 2.076
1/4- 14.1
mph- 97

100 shot
60-1.94
1/4- 12.8
mph- 106.3

I ran 12.8's before but with a 1.7 60'. So when I rebuild my lsd I should get those 60's down to at least a 1.7 or better. should be able to run 12.5's or better.

Sorry to hear about your rear ! I had same problem changed fluid to Lakewood gear oil and it has been working ever since knock on wood ! You should be 12.5 with a good 60 hope you get it straight I wish I could have made the trip was a good nite for racing how was track prep? I pulled the plugs and cleaned and gaped them went for little blast around town and with 3 degrees pulled it feels good !I was tempted but I don't want to smoke the head gaskets! If $ is tight right now get yourself some Lakewood (BFL) I think that's it will have to check its in garage I was told by old school racer about it its not cheap but I could not believe it got me burning both tires again with just a fluid change worth a try.Mine was noise too and it is alot quiter now