View Full Version : Info needed
steelhorse5778
01-05-2014, 04:27 PM
Ok so the truck is completely striped inside and out and about to go back together. I need to know what options are avalible for an SFI rated nuetral balance flexplate. The engine is a 408 stroker Scat cast crank, Eagle I beam rods, KB forged pistons, iron ram heads. behind it will be a freshly built 727 with 4000 stall and if i have time 4.56 gears. Only piece of the puzzle I can't seem to find is the flexplate.
White Turbo
01-05-2014, 04:32 PM
Ok so the truck is completely striped inside and out and about to go back together. I need to know what options are avalible for an SFI rated nuetral balance flexplate. The engine is a 408 stroker Scat cast crank, Eagle I beam rods, KB forged pistons, iron ram heads. behind it will be a freshly built 727 with 4000 stall and if i have time 4.56 gears. Only piece of the puzzle I can't seem to find is the flexplate.
There is no SFI rated flexplate with CPS holes.
steelhorse5778
01-05-2014, 06:02 PM
So then what are the options for a nuetral balanced flexplate?
Duner
01-05-2014, 06:36 PM
So then what are the options for a nuetral balanced flexplate?
You can either use the 5.2 flexplate or just remove the weight from your existing 5.9 flexplate.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.