PDA

View Full Version : oil catch can



RtBigdogg
02-02-2013, 02:00 PM
Just wondering oil catch can or should just stay with the pcv

BryanRT360
02-02-2013, 02:03 PM
http://www.dakotart.com/forum/search.php

Xxaler
02-02-2013, 03:28 PM
Guess you have not tried using the forum search feature. It's about as useful as tits on a nun.

Adobedude
02-02-2013, 05:30 PM
Just wondering oil catch can or should just stay with the pcv

You'll need a PCV regardless of catch can or not.

blackknight
02-02-2013, 06:06 PM
Plumb from the pcv to the catch can, from can to intake!

Slow RT
02-02-2013, 10:48 PM
Jegs has some sealed breathers with hose barbs on them that you can use in place of pcv valves, but they're expensive. They screw onto the valve covers too, but you may have to enlarge the valve cover holes for them. That's what I'm gonna use. I feel like the little Ol stock pcv valves don't flow enough. If you run those breathers you can plumb both to a catch can then a suction line to the manifold. That's my plan until I'm boosted again, which then I'll have my suction line before the supercharger.

blackknight
02-03-2013, 05:57 AM
Would anyone be interested in these 2 piece, screw in breathers?
http://i176.photobucket.com/albums/w180/99blackknight/0BC4C044-F2F7-40C5-85F2-E614BD4AD878-782-000000353F055583.jpg
http://i176.photobucket.com/albums/w180/99blackknight/D62A5785-BFB0-4413-9FF4-264DA736A91D-1842-000000695274A6AE.jpg

krs1r/t
02-03-2013, 01:52 PM
You'll need a PCV regardless of catch can or not.

I have no PVC !!!:idunno:

blackknight
02-03-2013, 04:27 PM
Hows that Krs?