snow or smc???

[Sick 660r]

talked to both and im really torn between the two

SMC
-tank in bed (1 gallon)
-comes with two nozzels
-test button, low level light, armed light, and fire light
-steel braided line
499 + 10 shipping

snow
-3 quart tank under hood
-send nozzels according to my setup
-firing light, no low level light
440 plus shipping

I like the idea of the tank in the bed, that way I can get rid of the fan shroud and these less clutter under the hood and they also have a low level light. And the tank holds one more quart than the snow kit. But I also like how the snow kit comes with nozzels according to my setup.

[bad360rt]

I had one of SMC's older kits, and their customer service is top notch. SMC can get you different nozzles if you need them.

I've heard good things about the Snow kits too, but I've only personally dealt with SMC.

[Sick 660r]

did you have the tank in the bed or under the hood? The smc pump is 110psi while snow's is 150. Is that going to make a difference? I think im just thinking about this too much lol

[bad360rt]

My tank was under the hood, their old kit had a small tank, maybe 1-1.5qt.

I'd go SMC, the low level light is a very good feature, you don't want to run out, especially if you're tuned for it, cause when you run out you'll probably go lean (it richens up the mixture a good bit).

[Sick 660r]

My tank was under the hood, their old kit had a small tank, maybe 1-1.5qt.

I'd go SMC, the low level light is a very good feature, you don't want to run out, especially if you're tuned for it, cause when you run out you'll probably go lean (it richens up the mixture a good bit).

I think im going to go with the smc kit.
1. larger tank
2. tank in bed probably colder temps
3. Wont have to use washer fluid tank so I can get ride of the fan shroud
4. warning lights and adjustibility from inside cab

Ill make sure to get a tune with the meth and without the meth that way if I do run out I can pull over and reflash the pcm.

[Sick 660r]

Where did you have your nozzles located? Did you have 1 or 2?

[bad360rt]

Where did you have your nozzles located? Did you have 1 or 2?

Mine had one nozzle, I mounted it on the backside of the Paxton airhat, on the angled part before it goes flat where the aux injectors are mounted. That way it sprayed towards the back of the airhat with the airflow. I don't have a picture of it tho, sorry.

[Sick 660r]

ordered the kit today. He gave me the medium size nozzle (only 7 bucks) because I told him I will probably be running washer fluid since I can get it for free. I got the 1 gallon tank that fits in the bed and has the pump attatched to it. So theres only one steel braided line in the engine bay. And for the controler Im going to put a t fitting on my boost gauge line.