PDA

View Full Version : 335/35/zr17



RED_ROCKET
07-02-2008, 08:53 PM
will they fit

SinCity R/T
07-02-2008, 09:31 PM
There's a number of people using that tire size out back with CCW Wheels, but you'll need to make sure your backspacing is just right so it doesn't rub on the inside or look funny from the outside.

bad360rt
07-03-2008, 12:43 AM
I hope your truck is slammed, those are only 26" tall. You could probably get away with an 11" rim, either a widened stocker or aftermarket. Of course if you can do a 12" or 13" rim, it would be better and the tire would be wider.

Jontoad
07-03-2008, 01:31 AM
i had 345s off a 96 viper on my stock wheels for shits and giggles once. good luck trying to find someone who will let you mount them tho. lol.

i just had them on there cause i got them free and wanted to burn them off. the truck looked like it was tubbed from the back. no rubbing.

the M&H radials are smaller than normal tires. their 335 is way narrow. you should be fine.

i used to run 315/something/17 bfg g-forces on the back of my reg cab on stock wheels before i sold it. those fit great.