PDA

View Full Version : what will i run



RED_ROCKET
06-12-2008, 11:16 PM
ok i have done some stuff, and the best time i have had spinning was 9.7 in the 1/8, i got some more goodies

m1,hughes 52tb, gsm headers dual exhaust no cats, underdrive pullies, built tranny with 2400 stall and some et streets 1.7 rockers and mopar pcm

when i ran the 9.7 i didnt have tb or pcm, you think low 9's with traction.

slvr03dakrt
06-12-2008, 11:43 PM
yep should be low nines. Low 14's in the 1/4 possible a high 13

RED_ROCKET
06-14-2008, 01:50 AM
im hoping for a 9 flat

grapejuice1998
06-14-2008, 01:57 AM
im hoping for a 9 flat

You gotta get some good tires under you!

RED_ROCKET
06-14-2008, 03:25 AM
You gotta get some good tires under you!

im hoping for so,e et streets

bad360rt
06-14-2008, 04:45 AM
You can experiment and see what works best for your truck, but when I had ET Streets (my first slicks), they liked a really good burnout and about 14psi. :goodluck:

BluRT00
06-14-2008, 01:14 PM
ok i have done some stuff, and the best time i have had spinning was 9.7 in the 1/8, i got some more goodies

m1,hughes 52tb, gsm headers dual exhaust no cats, underdrive pullies, built tranny with 2400 stall and some et streets 1.7 rockers and mopar pcm

when i ran the 9.7 i didnt have tb or pcm, you think low 9's with traction.


Low 9's is in there in the 1/8th. You're main issue is gonna be traction! I hit that wall with street tires, leaving me to leave off the line at idle and spinning out to the 60 ft. I ended up buying some 9 inch wide Hoosier slicks. Getting them mounted today, hopefully in a week or so I can know what it feels like with traction. Dan