View Full Version : coolant drip
03dakrt
06-11-2008, 01:19 PM
Not what I wanted to see but, Filled the truck up with coolant a few day ago and I found a few drops coming from in between the cylinder head and block. I checked both cylinders thru the plug hole and didn't see any coolant in the motor. I feel like I am getting an excessive amount of bubbles when I push on the radiator hoses to burp the system. Do you think I need to pull that head and try again or could it seal up after a heat cycle?
grapejuice1998
06-11-2008, 04:44 PM
Not what I wanted to see but, Filled the truck up with coolant a few day ago and I found a few drops coming from in between the cylinder head and block. I checked both cylinders thru the plug hole and didn't see any coolant in the motor. I feel like I am getting an excessive amount of bubbles when I push on the radiator hoses to burp the system. Do you think I need to pull that head and try again or could it seal up after a heat cycle?
Is it a Cometic gasket?
Also, are they R/T heads?
03dakrt
06-12-2008, 03:35 AM
Used Mopar performace head gaskets. Heads are Eddys.
What is the part number for the Fel-pros?
slvr03dakrt
06-12-2008, 03:40 AM
I used the felpro perma-torque mls when i did my build seems like they sealed up nicely.
BryanRT360
06-12-2008, 03:42 AM
Used Mopar performace head gaskets. Heads are Eddys.
What is the part number for the Fel-pros?
Felpro 1008 you would need 2
Rick Adams
06-12-2008, 09:44 AM
Not what I wanted to see but, Filled the truck up with coolant a few day ago and I found a few drops coming from in between the cylinder head and block. I checked both cylinders thru the plug hole and didn't see any coolant in the motor. I feel like I am getting an excessive amount of bubbles when I push on the radiator hoses to burp the system. Do you think I need to pull that head and try again or could it seal up after a heat cycle?
My Cometics leaked like that Dave.
With the R/T heads on the 402 I had to seal the header bolts...
03dakrt
06-14-2008, 02:56 PM
I just borrowed a pressure tester. I am having trouble finding where the coolant is coming from.
Salarguy
06-15-2008, 07:00 PM
My Cometics leaked like that Dave.
With the R/T heads on the 402 I had to seal the header bolts...
There 'should' be no exhaust bolt holes open to the coolant passages on RT heads.
Jontoad
06-15-2008, 10:20 PM
There 'should' be no exhaust bolt holes open to the coolant passages on RT heads.
there shouldn't, but on a lot of them there are.
03dakrt
06-24-2008, 03:08 AM
Thought I would show a photo of the issue.
Jamie Black R/T
06-24-2008, 03:26 PM
holy shit!!
let me be the first to throw out a WTF!!
DrewzR/T
06-24-2008, 03:50 PM
Am I seeing things or does that look like its straight outta the head ? Dont think thats a gasket issue bro.
Salarguy
06-25-2008, 12:51 AM
X2, porous head or dropped when it was a baby! HeHe!
03dakrt
06-25-2008, 01:36 AM
Yeah porosity hole. Have a new head on the way.
Salarguy
06-25-2008, 02:33 AM
Who covered it, your dealer or DC??
03dakrt
06-25-2008, 01:37 PM
Edelbrock, these aren't stock heads.
Salarguy
06-25-2008, 03:05 PM
Hmmm, didn't really look closely cause I thought we were talking about R/T heads leaking on exhaust flange bolts!!!
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.