CEL's P0351, P0305

[R/T48]

I've got the 351 3 times now, and a couple other cylinder missfire codes once. I put a new blaster coil on the truck and have no idea why i'm getting this. The truck has MSD 6A ignition and the blaster coil. Anyone had this problem or know what to do about it? Thanks a lot guys!

[BTLFED R/T]

P0351 (M) Ignition Coil #1 Primary Circuit Peak Primary circuit current not achieved with maximum dwell time.

P0305 - Misfire in cylinder 5.

Did you try going back to the stock ignition to see if the problem is with the MSD?

[R/T48]

No i haven't.. I was reading and it seems like maybe MSD 8910 will fix the problem. Here's the link that i found it on http://dakotausa.com/vBulletin/showthread.php?t=17371

[BTLFED R/T]

Oh, the tach adaptor, I gotcha. I wasn't sure what code it would throw without that. Sorry.

[R/T48]

No problem man. I am open for suggestions :biggthumpup:

[blackrt32]

i just put a msd 8910 my truck and i havn't got the p351 yet

[weaponx]

i had the cyl. misfire code too and the dealer said it was the heads. something about the valve guides leaking. hope this helps

[Special Ed's R/T - Yaaaay]

i just put a msd 8910 my truck and i havn't got the p351 yet

it's a soft code and won't light the CEL. you'd have to pull the codes to see it, but it's probably there already.

[slvr03dakrt]

Oh man lets see I think I got a few codes on ya I usually get a p0351,p0300,p0301, p0302, p0303, p0305,p0307, p0308 for some reason I usually done get a missfire code for cyl. 4 or 6