Where can I find upgraded seats 99 RC RT

[Asedoctor]

Hello gents I'm new to the board and I love what you guys have done with your trucks. I have 99 RC RT, wanted to upgrade both seats. I was thinking SRT4 Neon or Caliber ( Will these fit a regular cab?) and what mods will I have to fabricate/ do to make them fit? What are some good/cheaper sources to check for good deals on seats?

Thank you...

[Any R/T's]

SRT 4 and Caliber R/T Seats have been put in reg cabs already. Maybe someone will post up their pictures for you. If you're looking for new seats, I've been looking at Sparco R100 and seats from Cipher Auto.

[Asedoctor]

thanks for the reply, I will also look into your lead. I have manual seats, that is why I choose a simple racing seat like srt 4. It is hard to find them for a fair price, LKQ wants a fortune, searched ebay and craigs list nothing half way decent near my area.

[Kingst3r]

SRT-4 seats

http://i634.photobucket.com/albums/uu67/kingst3r/truck/IMG_4164.jpg

[Asedoctor]

Wow beautiful ^ Your interior is my GOAL. Some SRT4 seats and a little white face gauges action + Side Panel FABRIC (ACTION to match the seats). :hail:

[Connery23]

http://i.imgur.com/5ZiV6.jpg

With these all I did was drill out the rivets holding on the stock rails to the stock R/T seats and took the SRT 4 rails off and welded the stock R/T rails/brackets to the SRT 4 seats. I added spacers to the driver side SRT 4 seat because the stock R/T seat was automatic, so that way they both sat at the same height. It was a bitch lining them up and all and there are better ways to do it, but this is what I did.

[jmaack727]

http://atlanta.craigslist.org/sat/pts/2606355838.html

[Asedoctor]

Thank you thank you.....

[Kingst3r]

Wow beautiful ^ Your interior is my GOAL. Some SRT4 seats and a little white face gauges action + Side Panel FABRIC (ACTION to match the seats). :hail:

Thanks a lot man, appreciate it

http://i.imgur.com/5ZiV6.jpg

With these all I did was drill out the rivets holding on the stock rails to the stock R/T seats and took the SRT 4 rails off and welded the stock R/T rails/brackets to the SRT 4 seats. I added spacers to the driver side SRT 4 seat because the stock R/T seat was automatic, so that way they both sat at the same height. It was a bitch lining them up and all and there are better ways to do it, but this is what I did.

Looks good man. I did the same thing minus the spacers. I welded everything down and bolted em in and I was like, wtf the pass seat is way higher. I like being down low and im 6'2" so I thought the pass seat was too high, I like being down low.

[Connery23]

Looks good man. I did the same thing minus the spacers. I welded everything down and bolted em in and I was like, wtf the pass seat is way higher. I like being down low and im 6'2" so I thought the pass seat was too high, I like being down low.

Haha yeah I know what you mean, I am 6'2 as well but I am to OCD knowing the seats weren't at the right height haha