PDA

View Full Version : Other Water Necks?



uwntsumrtII
05-22-2008, 03:54 AM
will a BBChevy water neck fit on the older style M1 4bbl?

uwntsumrtII
05-22-2008, 05:21 AM
if you must know......

the filler neck (union piece in the upper hose w/ rad cap) grenaded on the Dingo today on my way to work. so i was just gonna take the entire hose w/ filler neck of the truck and slap it in the Dingo.

i can either replace the broken piece with one of these provided the hose is 1-1/2" ID.

http://store.summitracing.com/largeimage.asp?part=SME-2202-11

OR

do a hole different setup with one of these since the factory crap looks way out of place on my setup. Meziere lists them as fitting BBChevy and BBMopar. due to my everlasting short term memory problems....the older style 4bbl M1 takes a BBMopar T-Stat, correct? then it's just a matter of tracking down a hose that will fit well.

http://store.summitracing.com/largeimage.asp?part=MEZ-WN0017DS&Prod=Meziere+Water+Necks&img=mez-wn0017ds_w.jpg