PDA

View Full Version : Pre 1997 Dakota Big Brake Kits in the works...



brandonburns85
09-12-2011, 01:53 AM
Just wanted to let you guys know, well those of you with pre 97 dakotas that for the first time ever that I know of there will be brake kits for you guys... I have a member that is hooking me up with some spindles in a few weeks.

brandonburns85
11-05-2011, 12:35 AM
ALL HAIL MONZTER MOTORSPORTS!!!! hahaha jk check out what we have done now!!

http://i122.photobucket.com/albums/o272/lowdown4banger/20111104111617.jpg
http://i122.photobucket.com/albums/o272/lowdown4banger/20111104111507.jpg
http://i122.photobucket.com/albums/o272/lowdown4banger/20111104175024.jpg
http://i122.photobucket.com/albums/o272/lowdown4banger/20111104175030.jpg

also great news my new GoPro HD camera came today!!! so HD 1080P videos of my truck with these retarded awesome brakes will be up soon :) now you ALL will see what its like to lock up 4 wheels at a time!!!! haha

http://i122.photobucket.com/albums/o272/lowdown4banger/2011-11-04_19-12-39_221.jpg

Adobedude
11-05-2011, 12:46 AM
Ahem...

:biggthumpup:

brandonburns85
11-05-2011, 12:52 AM
u likey??? u bought ready for brakes drag race guy? hehehe man we are so overwhelmed since SEMA started oh wanna see my light installed??

http://i122.photobucket.com/albums/o272/lowdown4banger/2011-10-18_15-57-39_657.jpg
http://i122.photobucket.com/albums/o272/lowdown4banger/20111101112607.jpg
http://i122.photobucket.com/albums/o272/lowdown4banger/1319683666758.jpg

Adobedude
11-05-2011, 01:12 AM
Just need em by March...2012:biggthumpup:

Going with manual brakes, looking at this Master Cylinder. http://www.summitracing.com/parts/WIL-260-9439/

brandonburns85
11-05-2011, 08:58 AM
Just need em by March...2012:biggthumpup:

Going with manual brakes, looking at this Master Cylinder. http://www.summitracing.com/parts/WIL-260-9439/

ok sounds good man. havent looked if they fit our trucks or not. also i priced this out through my dealer but polished for a hyrdoboost im building for my charger and i can get same one polished for 199 something...

Adobedude
11-05-2011, 02:54 PM
ok sounds good man. havent looked if they fit our trucks or not. also i priced this out through my dealer but polished for a hyrdoboost im building for my charger and i can get same one polished for 199 something...

It'll be a custom install, but the 7/8" piston is what most people say I need.

What can you get the boring dull aluminum one for...?

brandonburns85
11-06-2011, 03:05 AM
It'll be a custom install, but the 7/8" piston is what most people say I need.

What can you get the boring dull aluminum one for...?

ill let you know monday thanks

brandonburns85
11-06-2011, 03:06 AM
Monzter Motorsports ride along with our New GoPro HD Camera

http://www.youtube.com/watch?v=I0CCxuq_x1M

http://www.youtube.com/watch?v=MyMTcAP3zso&feature=related

brandonburns85
12-30-2011, 08:33 AM
progress...
http://i122.photobucket.com/albums/o272/lowdown4banger/2011-11-12_00-20-41_677.jpg
to this
http://i122.photobucket.com/albums/o272/lowdown4banger/2011-12-30_03-21-22_593.jpg

mock up shortly... working on the billet modular hubs now... ya'll still interested right??? :) i hope

y2krtaf
12-30-2011, 12:23 PM
This would like better brakes.
http://i55.tinypic.com/29lbo6h.jpg
Keep me posted.

brandonburns85
12-30-2011, 02:22 PM
This would like better brakes.
http://i55.tinypic.com/29lbo6h.jpg
Keep me posted.

Oh that's hot!! Love red!! Details details... :)

y2krtaf
12-30-2011, 02:47 PM
Lil' 1996 318 5spd.200k on the odo.
Usual bolt-ons,headers,M1,ported t/b,full 3" exhaust,3:55 auburn out back.
Looking for a 360 to build for it etc.

brandonburns85
01-09-2012, 05:01 AM
Want to.let you guys know I'm still working on these kits. Took and cleaned the races out to get measurements for hub only conversion. So you guys will be able to replace rotors without messing with bearings :)
http://i122.photobucket.com/albums/o272/lowdown4banger/2012-01-08_23-52-31_665.jpg
http://i122.photobucket.com/albums/o272/lowdown4banger/2012-01-08_23-52-24_823.jpg

95kota408
03-20-2012, 09:39 PM
Any updates on these?

brandonburns85
05-21-2012, 02:17 PM
yes sir cutting the modular hubs today/tomorrow. looking at buying a 1/2 gen possibly today for testing...

anyone be interested soon?? thanks

brandonburns85
05-21-2012, 02:18 PM
sorry for being rude but please lemme know if you have a 1/2 gen and are really REALLY interested in a brake kit. gotta justify buying... another dakota ;)

brandonburns85
05-21-2012, 04:02 PM
what you guys think?
http://quadcities.craigslist.org/cto/3016386431.html
i was thinking $1500

bad360rt
05-21-2012, 04:36 PM
what you guys think?
http://quadcities.craigslist.org/cto/3016386431.html
i was thinking $1500

He says he's open to any cash offers, show up with a grand in your hand and see if he takes it. A lot of people will take less when they see the money in front of them.

94dakr/t
05-21-2012, 07:51 PM
I have a 94 and a 92 Dakota that are waiting on this kit to get completed. So keep up the good work.

brandonburns85
05-21-2012, 08:19 PM
I have a 94 and a 92 Dakota that are waiting on this kit to get completed. So keep up the good work.

Awesome!! Great to hear. Going to look at a 96 now ill let you guys know if i buy

Blue93Dakota
05-22-2012, 01:15 AM
You know I'm still interested.

95kota408
05-22-2012, 02:00 AM
Im interested. :biggthumpup:

brandonburns85
05-22-2012, 11:39 AM
Good to hear cause I just bought this for testing!! :)
http://i122.photobucket.com/albums/o272/lowdown4banger/2012-05-21_19-34-16_278.jpg

brandonburns85
05-30-2012, 03:19 AM
Started making chips :)

http://i122.photobucket.com/albums/o272/lowdown4banger/20120529221220.jpg

Blue93Dakota
05-30-2012, 09:57 PM
Done yet?

brandonburns85
05-31-2012, 05:24 PM
Done yet?

Your killing me. No... little bit left on hubs.
parts I ordered for the blue one are sold to a in NJ that needs brakes asap on his 3rd gen

Blue93Dakota
06-01-2012, 12:46 AM
I'm just kidding. That's a lot of work, I'm sure. you ready for the Tour?

brandonburns85
06-01-2012, 03:34 PM
I'm trying. Charger and my 08 mustang won't make it. The supercharger on mustang... something is wrong. Still at dyno shop.

Taking plan c. The gf yellow drop top I got her. Not what I wanna take but I put full exhaust on it stereo etc. Even tossed the chargers wheels on there so at least part of it is going ya know. And then imbtrying to finish the 67 I'm putting a in dash touch screen Navigation unit in her ;)

http://i122.photobucket.com/albums/o272/lowdown4banger/2012-05-30_16-19-31_691.jpg
http://i122.photobucket.com/albums/o272/lowdown4banger/2012-05-31_20-32-44_813.jpg

You still going?

ecpike
06-09-2012, 12:39 PM
brandon how can i geta set of rear disc brake setup do you have a web site

brandonburns85
06-11-2012, 06:13 PM
brandon how can i geta set of rear disc brake setup do you have a web site

cell is 2173580122

website is monztermotorsports.com

what do you need

brandonburns85
06-27-2012, 03:25 AM
here you guys go!!! all done!!

for you guys that wanna use stock rotors/hub units
http://i122.photobucket.com/albums/o272/lowdown4banger/20120623223201.jpg

for you guys that want a stage 1 that uses a 97-02 dakota 11" rotor and uses our modular hub.
http://i122.photobucket.com/albums/o272/lowdown4banger/20120622222415.jpg

for you guys that wanna go nuts and use a modular hub and a 13" viper rotor :woot:
http://i122.photobucket.com/albums/o272/lowdown4banger/20120626221544.jpg

brandonburns85
06-27-2012, 03:33 AM
http://i122.photobucket.com/albums/o272/lowdown4banger/20120626222747.jpg

94dakr/t
06-28-2012, 06:47 PM
Could you pm me with prices. Also is it possible to taper the last 1/4" of the hub around the bearing, wheel side to accomodate a wheel I'm trying to fit with out spacers? If you need pics to understand better let me know? Thanks

brandonburns85
07-18-2012, 08:04 PM
Ok so we have finished Several Big Brake kits for 1997-2002 and now we have started on Big Brake kits for the 2wd 1996 and earlier 1/2 Gen dakotas. He have 4 different options currently.

Options:

1. Stock dakota rotor/hub using a Wilwood 4 piston Caliper

2. Stock Sized (11.30") 3rd Gen dakota rotor (1997-2002) but with use of a modular hub/bearing assembly that allows removal of rotor with out messing with the internal bearings and grease.

3. Upgraded further is the use of a 2nd Viper Rotor 13" that also uses the modular hub and 4 piston Wilwood Caliper.

4. And last being the use of a 13" Viper Rotor and using a 2nd Gen Brembo Viper Caliper along with the modular hub assembly.

Here is some pictures of the 2nd option being installed to be tested shortly...

http://i122.photobucket.com/albums/o272/lowdown4banger/2012-07-18_13-39-56_733.jpg
http://i122.photobucket.com/albums/o272/lowdown4banger/2012-07-18_14-03-33_575.jpg
http://i122.photobucket.com/albums/o272/lowdown4banger/2012-07-18_14-04-06_593.jpg
http://i122.photobucket.com/albums/o272/lowdown4banger/2012-07-18_14-06-01_281.jpg
http://i122.photobucket.com/albums/o272/lowdown4banger/2012-07-18_14-22-17_382.jpg
http://i122.photobucket.com/albums/o272/lowdown4banger/2012-07-18_14-33-11_555.jpg
http://i122.photobucket.com/albums/o272/lowdown4banger/2012-07-18_14-35-39_648.jpg
http://i122.photobucket.com/albums/o272/lowdown4banger/2012-07-18_14-35-49_670.jpg
http://i122.photobucket.com/albums/o272/lowdown4banger/2012-07-18_14-40-24_400.jpg

brandonburns85
07-18-2012, 08:04 PM
Could you pm me with prices. Also is it possible to taper the last 1/4" of the hub around the bearing, wheel side to accomodate a wheel I'm trying to fit with out spacers? If you need pics to understand better let me know? Thanks

ok will do. shouldnt be a problem. if you could send me a wheel i could guarantee fitment

brandonburns85
07-19-2012, 01:49 AM
http://www.youtube.com/watch?v=JeEW8cUzcxg&list=UUN0twHLq2yywL65c2zu0_tQ&index=1&feature=plpp_video

brandonburns85
07-20-2012, 10:22 PM
http://i122.photobucket.com/albums/o272/lowdown4banger/020.jpg
http://i122.photobucket.com/albums/o272/lowdown4banger/019.jpg

brandonburns85
08-07-2012, 08:13 PM
we now offer affordable BIG brake kits for s197 mustangs. 14" GT500 rotors too.

spread the word

thanks

http://i122.photobucket.com/albums/o272/lowdown4banger/2012-08-02_10-19-00_944.jpg

before
http://i122.photobucket.com/albums/o272/lowdown4banger/2012-08-02_10-33-33_83.jpg

after
http://i122.photobucket.com/albums/o272/lowdown4banger/2012-08-02_10-31-16_5.jpg

video

http://www.youtube.com/watch?v=yVm3mu9YcRs

brandonburns85
08-08-2012, 04:05 AM
done in house ;)

http://i122.photobucket.com/albums/o272/lowdown4banger/100MEDIA36IMAG0686.jpg