mikset
06-26-2011, 09:17 PM
Got new plug wires and wire looms installed today. Beats the hell out of zip ties I must say. I used Mopar performance plug wires.
Only problem I had was the #8 wire was too short to route around the PS valve cover through the wire loom and the #6 wire was just barely long enough. What I did was used the #6 wire for the #8 plug and used the extra coil wire they send with the straight boot connector for the #6 plug. I had to get the spark plug boot off the #8 wire they sent, cut the spare coil wire to fit the #6 plug and install a new plug terminal. Kind of a pain in the ass but it came out pretty good I think.
http://i216.photobucket.com/albums/cc304/mikset/IMG_0336.jpg
http://i216.photobucket.com/albums/cc304/mikset/IMG_0337.jpg
http://i216.photobucket.com/albums/cc304/mikset/IMG_0338.jpg
Only problem I had was the #8 wire was too short to route around the PS valve cover through the wire loom and the #6 wire was just barely long enough. What I did was used the #6 wire for the #8 plug and used the extra coil wire they send with the straight boot connector for the #6 plug. I had to get the spark plug boot off the #8 wire they sent, cut the spare coil wire to fit the #6 plug and install a new plug terminal. Kind of a pain in the ass but it came out pretty good I think.
http://i216.photobucket.com/albums/cc304/mikset/IMG_0336.jpg
http://i216.photobucket.com/albums/cc304/mikset/IMG_0337.jpg
http://i216.photobucket.com/albums/cc304/mikset/IMG_0338.jpg