White Trash Progress

[uwntsumrtII]

well, i got all the new stuff outside of the cab painted tonight...

found out that a couple parts i bought won't work. Bracket for the fuel filter is too large. And the JAZ filler neck is too small :jerkit:

oh well, the project ventures on....

http://s782.photobucket.com/albums/yy106/uwntsumrtII/White%20Trash/Caged/

http://s782.photobucket.com/albums/yy106/uwntsumrtII/White%20Trash/Fuel%20System/

[uwntsumrtII]

trans is done. gonna pick that up on Friday. The new bump stick should be here by then as well :biggthumpup:

[Sick 660r]

what fittings are those going into the frame. Never seen ones like that before.

Nice progress.

[biggblu601]

good progress pics. pretty good detail looks bad ass.

[Rtspeeddemon]

She gonna be ready for the meet?

[ADakotaRTGuy]

We ended up buying the filler from RCI and extended it. Its a 1 3/4" steel pipe, so it works out well.

[uwntsumrtII]

what fittings are those going into the frame. Never seen ones like that before.

Nice progress.

Fragola bulkead fittings. Im gonna run the fuel line right down the inside of the frame.

[BluRT00]

I'm loving it! :biggthumpup:

[uwntsumrtII]

Couple pix added...

Got the cell back in. Feed and return line are run.

I should be able to finish up the fuel system from the cell to the y-block and from the regulator back to the cell. Also get the pump wired, y-block and filter mounted. And the bracket I made for the regulator, coil and voltage regulator.

At work now, stay tuned....

[BluRT00]

Couple pix added...

Got the cell back in. Feed and return line are run.

I should be able to finish up the fuel system from the cell to the y-block and from the regulator back to the cell. Also get the pump wired, y-block and filter mounted. And the bracket I made for the regulator, coil and voltage regulator.

At work now, stay tuned....

How much did this whole setup run? I see your running a stealth fuel tank setup.

[uwntsumrtII]

How much did this whole setup run? I see your running a stealth fuel tank setup.

~$1500 with a regulator

I got a little creative on mine by running the lines up through the frame rail.

[Rtspeeddemon]

~$1500 with a regulator

I got a little creative on mine by running the lines up through the frame rail.

Soooooo is it gonna be ready for the meet?

[BluRT00]

~$1500 with a regulator

I got a little creative on mine by running the lines up through the frame rail.

Thank you sir. I dig going through the frame looks slick. Tech won't have any issues with it I take it?

[KTK00R/T]

still got the flat black hood with the road runner scoop?

[uwntsumrtII]

Soooooo is it gonna be ready for the meet?

i hope so....

[uwntsumrtII]

Thank you sir. I dig going through the frame looks slick. Tech won't have any issues with it I take it?

they should be fine.


"Lines: All non-OEM fuel lines (including gauge and/or data
recorder lines) must be metallic, steel braided, or NHRA-accepted
“woven or woven-pushlock.” A maximum of 12 inches total (front to
rear) of non-metallic or non-steel braided hose is permitted for
connection purposes only; individual injector nozzle and motorcycle
fuel lines are excluded. Fuel lines (except steel braided lines) in the
flywheel/bellhousing area must be enclosed in a 16-inch length of
steel tubing, 1/8-inch-minimum wall thickness, securely mounted as
a protection against fuel-line rupture. Fuel lines may not be routed
in the driveshaft tunnel. It is mandatory that fuel lines passing
supercharger drive belts be steel braided, NHRA-accepted woven
or woven-pushlock, or be enclosed in protective steel tubing. A
current list of NHRA-accepted woven or woven-pushlock fuel lines
is available on NHRA.com. All NHRA-accepted fuel lines must us"

[uwntsumrtII]

still got the flat black hood with the road runner scoop?

i still have it but it's falling apart.

[uwntsumrtII]

Couple more pix added...

[uwntsumrtII]

It's 4:08 am, no really it is :jester:

Anyway, I've got some more pix of my progress posted on PotoBucket in the "Fuel System" album.

Vacuum canister isn't mounted, but I think that's about where I'm gonna put it. Maybe a little higher/back up the fender.

Bump stick came in today. Man, that thing has some wide lobes :woot:

Still waiting on new valves and a hood :jerkit:

Im tired.....:bs:

[uwntsumrtII]

:woot: :burnout: :drive:

http://i782.photobucket.com/albums/yy106/uwntsumrtII/White%20Trash/DSC03123.jpg

[KTK00R/T]

i still have it but it's falling apart.

Damn... loved that thing.

[uwntsumrtII]

Todays progress....

Ass end is all done for the most part. :woot:

Heads are all tore down. got to do some more cleaning. when the valves come in, a lap job, then i can reassemble them.

http://i782.photobucket.com/albums/yy106/uwntsumrtII/White%20Trash/Fuel%20System/2011-05-21_03-59-58_610.jpg
http://i782.photobucket.com/albums/yy106/uwntsumrtII/White%20Trash/Fuel%20System/DSC03126.jpg
http://i782.photobucket.com/albums/yy106/uwntsumrtII/White%20Trash/Fuel%20System/DSC03124.jpg
http://i782.photobucket.com/albums/yy106/uwntsumrtII/White%20Trash/DSC03128.jpg

[loudrango]

great build!:hail:

[uwntsumrtII]

todays progress.....

picked up the new hood
picked up a set of fan brackets. they are finishing up the rest today.
reordered int/ext valves to be sure they are here by Friday.

[ADakotaRTGuy]

picked up a set of fan brackets. they are finishing up the rest today

FUCK YEA.

[Rtspeeddemon]

Lookin good!

[uwntsumrtII]

All that's left is:

cam swap
degree it in
assemble the heads
Slap it together
hook up the trans
drop it in
finish the fuel lines
And hook everything back up

I'm sure there are a few odds & ends to finish up as well. :stirringthepot:

[uwntsumrtII]

stuck workin tonight and tomorrow night :rtfm: I GOT SHIT TO DO!!!

today, lapped all the new valves in & heads are reassembled. that was a time consuming project right there. but its done now. :biggthumpup:

gonna drop the motor @ trans in tomorrow. then we'll swap cams.

more pix on PhotoBucket :biggthumpup:

[uwntsumrtII]

If anyone still cares... :Dl

Today, my brother and I got the heads bolted down. Trans is mated up with the motor and dropped in. Not bolted on yet. Tomorrow Rick and Kenny are gonna stop by to lend a hand. If anyone else wants to stop by, send me a text message.

Rob Rohe
734-812-9244

Still unsure about a trailer. U-Haul wants an arm and a leg to rent one :bs:. I can't find any other place

[ADakotaRTGuy]

Put an add on Craigslist to ask to rent one privately. Worth a shot in the dark.

[Branx5.9]

Wish I was closer I have access to a 14ft one that you could use.

[uwntsumrtII]

I may have found one to use :biggthumpup:

[Adobedude]

I may have found one to use :biggthumpup:

Have you towed before...?

[uwntsumrtII]

Have you towed before...?

Oh yeah, a few times. Why you ask?

[Adobedude]

Oh yeah, a few times. Why you ask?

Just wondering...Lots to think about, lotta people just pop on a trailer and call it good.

[uwntsumrtII]

the end is near.....:finger:

http://i782.photobucket.com/albums/yy106/uwntsumrtII/2011-05-30_20-05-08_875.jpg

[RTchas]

Looking Good ! :biggthumpup: