Gen 2 question

[Opie]

i have a 95 dakota with a lowering kit on it and some r/t wheels on it and im having a issue with some rubbing of the wheels ...not the tires has anyone ran into this before. and if so what did you have to do to make them fit

[Special Ed's R/T - Yaaaay]

how about some wheel spacers ?

[ScatDak]

All you need to do is grind the control arm a little bit to give the needed clearance. If your Gen2 is lowered how is it lowered, mine is lowered with Bell Tech spindles and all I had to do was grind a little off of the lower control arm.

[Opie]

All you need to do is grind the control arm a little bit to give the needed clearance. If your Gen2 is lowered how is it lowered, mine is lowered with Bell Tech spindles and all I had to do was grind a little off of the lower control arm.

it looks like a spring drop. its doing alil rubbing on the upper control arm so ill take alil off that and see where im at
thanks for yalls help

[ScatDak]

Then thats where you need to grind it then.