the new goodies and build

[bfranzel]

got these today.
http://i641.photobucket.com/albums/uu132/bradr-t/newgoodies3-1-11014.jpg
http://i641.photobucket.com/albums/uu132/bradr-t/newgoodies3-1-11016.jpg
http://i641.photobucket.com/albums/uu132/bradr-t/newgoodies3-1-11015.jpg
and i got some meth last friday. what do you guys think about the location?
http://i641.photobucket.com/albums/uu132/bradr-t/newgoodies3-1-11006.jpghttp://i641.photobucket.com/albums/uu132/bradr-t/newgoodies3-1-11005.jpg
http://i641.photobucket.com/albums/uu132/bradr-t/newgoodies3-1-11008.jpg

[blackknight]

Ok i like the solid motor mounts but whats up with those welds, looks like a first grader welded them gdam! I hope they didnt charge for the spool of wire as well

[1evilrt]

Who did you have build the mounts?

[2k1AmberR/T]

Is the pump designed to be mounted there? I thought it needed to be close to the tank?

[WeezyRT]

Good stuff :biggthumpup:

I saw you posted a thread about a solid mount group buy but doesnt seem to be much interest.

How much did they run ya?

[G-Man]

Ok i like the solid motor mounts but whats up with those welds, looks like a first grader welded them gdam! I hope they didnt charge for the spool of wire as well

looks like I welded them, Lol

[Kingst3r]

Those welds blow, damn.

[bfranzel]

Is the pump designed to be mounted there? I thought it needed to be close to the tank?

the pump can be mounted where ever. sealed motor. as far as the tan it can be mounted where ever also, 200 psi pump the solinoid has to be close to the intake thats all.

[bfranzel]

Who did you have build the mounts?

some guy local. they cost too much.

[bfranzel]

Ok i like the solid motor mounts but whats up with those welds, looks like a first grader welded them gdam! I hope they didnt charge for the spool of wire as well

lol yes he over engineered the for sure and loaded the welds up.

[bfranzel]

Those welds blow, damn.

willing to bet you cant do any better:finger:

[jj malone]

He goobered what should be the easiet part. "LOADED' doesn't mean it's strong.

[RJ_Hythloday]

Just say no to meth kids. :drive:

[Sick 660r]

sorry but I would have never paid for those mounts.

Edit: the welds scared me so much I didnt know the tial bov was in the pic until I looked at them twice LOL

[Kingst3r]

willing to bet you cant do any better:finger:

Um I doubt it but I would get close, I'm willing to bet half the people on here wouldnt pay for those welds :finger:

[blackknight]

Um I doubt it but I would get close, I'm willing to bet half the people on here wouldnt pay for those welds :finger:

yea no doubt, im a certified welder myself, tig and mig (ss,mild and aluminum) there is such thing as overwelding, geez we put these things on a diet not add more weight to them :jester: sorry

[bfranzel]

alright you bunch of assholes. ya'll made me feel bad about the welds so i took them to a buddy to have him clean them up:finger: now if you asses would stick with the question of the meth shit that would be great:jester:

[BluRT00]

alright you bunch of assholes. ya'll made me feel bad about the welds so i took them to a buddy to have him clean them up:finger: now if you asses would stick with the question of the meth shit that would be great:jester:

Meth is bad mmmmmkay. :jester:

[BryanRT360]

alright you bunch of assholes. ya'll made me feel bad about the welds so i took them to a buddy to have him clean them up:finger: now if you asses would stick with the question of the meth shit that would be great:jester:

Go jump off a bridge

[bfranzel]

Go jump off a bridge

no...... wheres raw rt? i need him to chime in! besides that didnt answer the question. 60pounders showed up today

[BryanRT360]

:biggthumpup:

[bfranzel]

hey Brian! are these the ones you have?

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=270584617748&viewitem=&sspagename=STRK%3AMEWNX%3AIT

[Five9Dak]

The meth pump location is clever and well hidden, but not ideal. The tank's pickup should be higher than the pump's inlet or it will not prime reliably, or at all.

Mine is bolted to the front bumper bracket, you would never guess unless I told you.

[BryanRT360]

hey Brian! are these the ones you have?

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=270584617748&viewitem=&sspagename=STRK%3AMEWNX%3AIT

Yup..

[RJ_Hythloday]

Yup..

$350 EA!!! %*^%&*! ??

[2k1AmberR/T]

The meth pump location is clever and well hidden, but not ideal. The tank's pickup should be higher than the pump's inlet or it will not prime reliably, or at all.

Mine is bolted to the front bumper bracket, you would never guess unless I told you.

That's what I was thinking for some reason. I'm wondering if anyone has modified a 99 style washer fluid bottle to use as a tank, and if so what exactly needs to be done for it to serve both purposes?

[bfranzel]

The meth pump location is clever and well hidden, but not ideal. The tank's pickup should be higher than the pump's inlet or it will not prime reliably, or at all.

Mine is bolted to the front bumper bracket, you would never guess unless I told you.

good point never even thought about that. well i guess ill take it out and find a new spot.

[BluRT00]

Mine is bolted to the front bumper bracket, you would never guess unless I told you.

Well now we don't have to guess seeing you told us all. :jester:

[Five9Dak]

That's what I was thinking for some reason. I'm wondering if anyone has modified a 99 style washer fluid bottle to use as a tank, and if so what exactly needs to be done for it to serve both purposes?

All you have to do is drill a hole and install a bulkhead fitting with sealant. Snow recommends the automotive version of "GOOP." You will be able to use the factory low level sensor light, which is pretty convient.

If you wan to add a low level sensor to an aftermarket resevoir, the stock sensor is availble for 7 dollars on rockauto. Then you can extend the factory washer level wires to w/e you have the resevoir and use the stock connector.

[bfranzel]

All you have to do is drill a hole and install a bulkhead fitting with sealant. Snow recommends the automotive version of "GOOP." You will be able to use the factory low level sensor light, which is pretty convient.

If you wan to add a low level sensor to an aftermarket resevoir, the stock sensor is availble for 7 dollars on rockauto. Then you can extend the factory washer level wires to w/e you have the resevoir and use the stock connector.

i might just get a stock washer resevoir and do what you did. on a good note, the motor ships out monday and i get it friday:rockwoot:

[GoFastGray]

That's what I was thinking for some reason. I'm wondering if anyone has modified a 99 style washer fluid bottle to use as a tank, and if so what exactly needs to be done for it to serve both purposes?

I'm guessing you overlooked my set-up, or forgot about it.
I have my pump in the same location under the wiper cowl, and used a 97-99 style washer fluid reservoir for my methanol. Over 1.5years so far. Works great for me!

FYI: The pump is higher than the reservoir and primes itself by the way, it's not a gravity fed unit :jester:
You can test this by leaving the solenoid off and putting the tube that comes out of pump in a can (or back in the reservoir in my case). Turn the key to on and watch it cycle the methanol, priming the setup all the way to the solenoid's location. They reccomend putting the can and pump close to the injection area...but the main item that needs to be as close as possible is the solenoid. Mine is 2-3 inches from the jet :biggthumpup:

[bfranzel]

I'm guessing you overlooked my set-up, or forgot about it.
I have my pump in the same location under the wiper cowl, and used a 97-99 style washer fluid reservoir for my methanol. Over 1.5years so far. Works great for me!

FYI: The pump is higher than the reservoir and primes itself by the way, it's not a gravity fed unit :jester:
You can test this by leaving the solenoid off and putting the tube that comes out of pump in a can (or back in the reservoir in my case). Turn the key to on and watch it cycle the methanol, priming the setup all the way to the solenoid's location. They reccomend putting the can and pump close to the injection area...but the main item that needs to be as close as possible is the solenoid. Mine is 2-3 inches from the jet :biggthumpup:

you know i thought i remembered someone doing that. so i dug up and oldy!


http://i34.photobucket.com/albums/d105/mynikonn90s2/Blower%20build/DSC_0136.jpg

http://i34.photobucket.com/albums/d105/mynikonn90s2/Blower%20build/DSC_0142.jpg




no issues with it priming? what about pics of the modded washer tank, do you have any? i have the same kit what did ya do about the big ass hole for the washer fluid motor?

[GoFastGray]

you know i thought i remembered someone doing that. so i dug up and oldie!


no issues with it priming? what about pics of the modded washer tank, do you have any? i have the same kit what did ya do about the big ass hole for the washer fluid motor?

No issues at all priming. I have pics of the modded tank, but they are on my camera and I'll have to dig them up. The big hole; I found a plastic plug for it, than got some RV tank sealant and sealed it up really well. I also put a metal plate on the bottom and tapped it so the hose that goes in wasn't fitted to the plastic tank. Just to make sure it would last longer instead of threading the plastic reservoir.
Working two jobs, but i'll try to get pics up as soon as I can :biggthumpup:

[bfranzel]

No issues at all priming. I have pics of the modded tank, but they are on my camera and I'll have to dig them up. The big hole; I found a plastic plug for it, than got some RV tank sealant and sealed it up really well. I also put a metal plate on the bottom and tapped it so the hose that goes in wasn't fitted to the plastic tank. Just to make sure it would last longer instead of threading the plastic reservoir.
Working two jobs, but i'll try to get pics up as soon as I can :biggthumpup:

good deal kevin. i appreciate it. i picked up a resevoir from the junk yard today for 17 bucks.

[bfranzel]

so i picked this thing up today
http://i641.photobucket.com/albums/uu132/bradr-t/408andfalcon016.jpg
http://i641.photobucket.com/albums/uu132/bradr-t/408andfalcon015.jpg

[blackknight]

Purty!

[bfranzel]

Purty!

lotsa money later i am thinkin the same thing

[blackknight]

And you wanted to put those ugly motor mounts on that

[jj malone]

:jerry:

[GoFastGray]

Southeast 408?

[Branx5.9]

PIE I believe...Looks good!!

[bfranzel]

Southeast 408?
no i would definantly not buy any thing from him again. to many stories of him building fucked up motors and claiming "its not my fault".
PIE I believe...Looks good!!

yep chris has been great to deal with so far!

[BluRT00]

Looks like a big boat anchor. Nice. :biggthumpup:

[bfranzel]

havent been on very much at all lately but i gother running. i had some issues come up andcant put the money into the build like i wanted to but here is the video. open headers, so its to loud to hear yourself think.


http://i641.photobucket.com/albums/uu132/bradr-t/th_408puttogether032.jpg (http://s641.photobucket.com/albums/uu132/bradr-t/?action=view&current=408puttogether032.mp4)

[huskerrt79]

Heck ya buddy! Better get them wires away from the headers on that passenger side though. lol!

[BluRT00]

Loving it dude! :biggthumpup:

[Kingst3r]

Badass man :rockwoot: