PDA

View Full Version : Mopar PCM and tuning



nloeffler16
01-17-2011, 04:07 AM
I have a mopar performance pcm installed on my truck and im runinng a procharger p1sc and i heard they dont hold your tuning well and isnt reliable? any advice and should i just get a stock pcm and run that with boost?

Five9Dak
01-17-2011, 11:21 AM
Yeh you'll be up about 75-100 dollars if you get a stocker and tune that, instead of ruining your mopar by overwriting it. Somebody will buy the mopar, here or on dak-dur.

nloeffler16
01-17-2011, 11:15 PM
okay so best thing is get stock. and also another question i was curious on what pound injectors to run with my truck and i was gonna go with the 39lb injectors? any help

White Turbo
01-17-2011, 11:20 PM
Start with a stock PCM, get SCT and have Sean (hemifever) tune it.

He can also recommend the injectors needed.

nloeffler16
01-17-2011, 11:29 PM
okay thanks

Five9Dak
01-17-2011, 11:56 PM
You should look into shops that have the chysler tuning software in area if you are boosted. Even a three or for our drive for a dyno tune will be worth it. Emailing boosted setups is sketchy at best.

nloeffler16
01-18-2011, 12:09 AM
so your saying find a shop that does dyno tuning? more reliable

Five9Dak
01-18-2011, 01:15 AM
If you can find a shop with a dyno that can tune chysler SCT stuff, that is much better than a email tune. More reliable, more power, safer etc etc.

nloeffler16
01-18-2011, 01:26 AM
yeah i understand that. i was gonna get the sct and tune a little and have a dyno shop tune the rest and get more out of it.