PDA

View Full Version : SCT with a stock PCM on a Vortech setup?



Mythic
11-28-2010, 05:23 PM
Wil it work? This truck is runningon complete stock ignition, I want to have it here Tuned here at the local dyno shop. It also has a brand new crane cams fireball ignition with timing retard control and coil that im gonna have hooked up too.

WhiteRT
11-28-2010, 06:22 PM
Yes + 2 bar map + big injectors

Mythic
11-28-2010, 06:40 PM
Yes + 2 bar map + big injectors

So I should get rid of the 2 airhat injectors and go for some 42lb ones for the intake manifold?

WhiteRT
11-28-2010, 06:41 PM
So I should get rid of the 2 airhat injectors and go for some 42lb ones for the intake manifold?

Yes!!

Mythic
11-28-2010, 06:54 PM
Yes!!

Haha point me where to go! I want to get it tuned this week so anything I need tell me where to get it :)

WhiteRT
11-28-2010, 06:56 PM
Haha point me where to go! I want to get it tuned this week so anything I need tell me where to get it :)

Buyfordmotorsports.com - injectors
hemifever@aol.com - SCT (he can help you tune it too)
Ask Sean (hemifever) what map he likes to use with the SCT - I have an accel from summit racing

Todd

PeteRT
11-28-2010, 11:44 PM
i use the same:

http://www.jegs.com/i/DFI/310/74776/10002/-1

Mythic
11-29-2010, 11:45 AM
Alright so he said get some FMS 42lb injectors and a 2 bar map sensor, I've got some stock Viper v10 injectors I may can use one I see what lb they are...