PDA

View Full Version : 360 fresh .030 block & Transmission



truckracenut
08-29-2010, 02:56 PM
New prices = I want this stuff out of my way!

Trans out of my 2000 RT. built w/trans go kit, Kevlar clutches, Convertor loosened up(should stall approx.2800-3000) and drain plug added. This was built and never ran, put it in and realized that i had destroyed the motor when the trans failed. I pulled the trans back out and parted all the performance parts out. $425.00 Shipped to lwr. 48 SOLD!
Bare 360 Magnum block .030 over. New freeze plugs, cam bearings. Bought it thinking of building a stroker, before tossing in the towell and selling everything. $325.00 shipped to lwr 48. SOLD!
If the prices sound like too much, make me an offer. I'm also open to trades (SBF)--shoot me what you got.

User
08-29-2010, 07:55 PM
God damn i wish the 2000 trannys fit the 2001s

Nice prices, if that was an 01+ tranny i would buy it right now.

Addicted2Blue00
08-29-2010, 09:18 PM
dam where were u 5 days ago????

66shelby
08-30-2010, 02:21 AM
How much does it cost to build a stock 360 motor? I have a V6 and would like to put a 360 R/T motor in it.

User
08-30-2010, 03:00 AM
How much does it cost to build a stock 360 motor? I have a V6 and would like to put a 360 R/T motor in it.

You would have to use larger pistons if you got this bloke it has been bored .030 over, but i guess you could still put the same stock crap back on it, tons of people sell the stock shit all the time. I have a garage full of all the shit i took off mine, but im going to save it if i ever decide to return back to stock.

Stock heads, intake manifold, exhaust manifolds, rockers, timing chain, valve covers, cam, rods, tb you could get for maybe around $500 give or take a few hundred. Just look for shit for sale.

Its a lot more cheaper then doing the perf. route. hell finding a 2bbl m-1 for around 400-500 would put you over the top for all the stock parts people sell.

1BAD99RT
08-30-2010, 03:05 AM
what is the diff between the transmissions? I thought they were all 46RE's

User
08-30-2010, 03:31 AM
what is the diff between the transmissions? I thought they were all 46RE's

00 and below have a different housing and neutral safety switch, then the 01+

I tried to swap my 2000 built tranny from my burnt truck to the 01 and i cant.. due to the differences. It sucks.

jr/t01
08-30-2010, 05:14 AM
New prices = I want this stuff out of my way!

Trans out of my 2000 RT. built w/trans go kit, Kevlar clutches, Convertor loosened up(should stall approx.2800-3000) and drain plug added. This was built and never ran, put it in and realized that i had destroyed the motor when the trans failed. I pulled the trans back out and parted all the performance parts out. $425.00 Shipped to lwr. 48

Bare 360 Magnum block .030 over. New freeze plugs, cam bearings. Bought it thinking of building a stroker, before tossing in the towell and selling everything. $325.00 shipped to lwr 48.

If the prices sound like too much, make me an offer. I'm also open to trades (SBF)--shoot me what you got.

hey bro were u saying the parted out all of the performance parts on the motor or trans out with the trans has all the stuff in it still and u still have i am very interested

RJ_Hythloday
08-30-2010, 03:01 PM
How much does it cost to build a stock 360 motor? I have a V6 and would like to put a 360 R/T motor in it.

Check the first post in my build log, it's full of prices, mostly I got used where I could, it will give you an idea. It aint cheap. Plus you'll need a V8 wiring harness, over $1,000 from a dealer, they turn up once in a while, or wrecking yards, especially after cash 4 clunkers.


hey bro were u saying the parted out all of the performance parts on the motor or trans out with the trans has all the stuff in it still and u still have i am very interested

I can't do it right now, but was curious if the trans was still built also?

truckracenut
09-01-2010, 02:00 AM
hey bro were u saying the parted out all of the performance parts on the motor or trans out with the trans has all the stuff in it still and u still have i am very interested

Yes the trans is still a built trans.

truckracenut
09-01-2010, 02:02 AM
How much does it cost to build a stock 360 motor? I have a V6 and would like to put a 360 R/T motor in it.

Well the sky is the limit when building this motor. I would hate to even guess what kind of money i had in my truck. But, money is purely relative, if you want to go fast it's worth it.

truckracenut
09-01-2010, 02:05 AM
what is the diff between the transmissions? I thought they were all 46RE's

My thought on the difference is the electronics. This is just my thoughts and based solely on what someone told, not on research. I'm not aware of other issues.

00"Dakdak
09-03-2010, 07:55 PM
What state and and how much for the trans if I pick it up

truckracenut
09-03-2010, 10:16 PM
What state and and how much for the trans if I pick it up

I'm in Southwest Missouri, and will sell for 300.00 local pickup.

bfranzel
09-03-2010, 10:17 PM
I'm in Southwest Missouri, and will sell for 300.00 local pickup.

so what did you trade the r/t for?

truckracenut
09-04-2010, 12:10 AM
so what did you trade the r/t for?

Well I kinda switched gears and built a 01 mustang for autocross. It's got the torque arm suspension w/ panhard bard, and all the other goodies from maximum motorsports that it takes to make them turn. 315-35-17 tires on all 4 corners. I'm also currently building a 93 mustang notchback for the dragstrip.

dodgefan67
09-04-2010, 12:31 AM
man if only it was bonus time (and i was getting a bonus) i would be all over this, would be real nice to have an extra motor and tranny laying around, of course, then i wouldnt have room in my garage :)

good luck with the sale! i have only been a dakota owner for 2 days now, but those prices seem to be extremely fair. im sure you will sell them soon enough, just wish it would be to me :)

truckracenut
09-11-2010, 03:34 PM
Block is SOLD!

Somebody's gonna get a hell of a deal on a trans....

BluRT00
09-11-2010, 08:11 PM
Bump for a good seller. I bought his heads/ cam combo/ valve train off him last year.

RTnewbie
09-15-2010, 01:58 PM
Please get a hold of me on this transmission! I have a 2000 R/T that needs one and I have cash.
Mark

truckracenut
09-16-2010, 12:34 AM
Please get a hold of me on this transmission! I have a 2000 R/T that needs one and I have cash.
Mark

PM sent

RTnewbie
09-16-2010, 02:05 AM
Sent back a PM but your mail box is full it said. My zip is 33071 residential or 33487 business with a loading dock.

1BAD99RT
09-16-2010, 04:24 AM
Let me know if the sale doesn't go through. I'm just up here in Festus. I don't need a trans right now but it would be nice to have when mine goes.

truckracenut
09-16-2010, 11:01 PM
Sold!