GC Fan Install (Installed)

[uwntsumrtII]

well, i go the GC fan in with my custom brackets. i think it turned out awesome. these are just prototype brackets. i will look into haveing a few sets made if there is enough interest. i have no idea on what the cost will be.

i also installed the thicker replacement radiator.

i just got back for a test drive. it's 90* out (Hot & Humid). tried to find some traffic. it held steady at 180-190*. i even let it idle for a while and the fan cooled it off enough for it to shut off. it was pullin some heat! :biggthumpup:

vid - http://tinypic.com/m/axmng6/4

http://i50.tinypic.com/s5wavo.jpg
http://i49.tinypic.com/21ai6vl.jpg
http://i45.tinypic.com/6qvgnq.jpg
http://i47.tinypic.com/2v7xdn8.jpg

[Branx5.9]

Looks great...Ill take brackets lol I already have the fan. Let me know when you get a price.

[RJ_Hythloday]

What year is yours? I'm thinking I'm going to have to ask around and find a friend w/ a welder to help me get mine installed.

[uwntsumrtII]

What year is yours? I'm thinking I'm going to have to ask around and find a friend w/ a welder to help me get mine installed.

all of them are a 2000 :biggthumpup:

[ddrango]

00'+ are the same, I'd like a set but you gotta see what I have now lol. It gets the job done for now.

But yea this fan is AWESOME

[Special Ed's R/T - Yaaaay]

Rob, I'll take a set, for sure.

[TheVool]

I would also definitly be interested in a set of brackets. keep us posted.

[Special Ed's R/T - Yaaaay]

Rob, I know someone with a plasma table that could cut them out for you.

[jmaack727]

Can you pm me a price you had in mind for the brackets?

[DjWolf37]

What year is yours? I'm thinking I'm going to have to ask around and find a friend w/ a welder to help me get mine installed.
I got a welder man if you need help. I am 45 min north of Richmound.




anyone know what kind of CFM this fan is rated at. I am very interested in a set of brackets.

[uwntsumrtII]

Can you pm me a price you had in mind for the brackets?

i don't have a clue. i don't know what materials will cost.

[uwntsumrtII]

I got a welder man if you need help. I am 45 min north of Richmound.




anyone know what kind of CFM this fan is rated at. I am very interested in a set of brackets.

i have a place in mind

fan is rated up to 4000cfm

[Adobedude]

i have a place in mind

fan is rated up to 4000cfm

GC fan..?
Who makes it, how many Amps does it draw...?

Nice brackets BTW. :biggthumpup:

[ScojoDak]

GC = Grand Cherokee. Made by Mopar. A 25 amp draw posted on the dd.com site. I eyeballed one and it looks like a nice piece. I'm considering installing one.

[Adobedude]

GC = Grand Cherokee. Made by Mopar. A 25 amp draw posted on the dd.com site. I eyeballed one and it looks like a nice piece. I'm considering installing one.

What does the infamous Viper Fan draw...?

I'm more worried about Amp draw than cooling....LOL

My priorities are so fucked up.

[Special Ed's R/T - Yaaaay]

i don't have a clue. i don't know what materials will cost.

I can get them lazer cut, in steel or aluminum, pretty cheap. Guy across the street from me has a CNC plasma table in his garage. It works just like a WaterJet machine, only it uses a plasma cutter.

[Bos-R/T]

all of them are a 2000 :biggthumpup:

Hey man, NICE brackets. I like that small shroud, pretty cool. Where did you get your radiator from? Mine came factory with the 2 row and when I kept having overheating probs, yes the GC fan was installed, I decided to get a new radiator. I went to LMC and got mine. It says its a 2 row radiator. 200.00 it cost me. Went to install it and flushed my engine out, when I took the draincock out I could see that the radiator is actually a 1 row BUT is pretty wide. Pissed me off. I could have bought a one row radiator for 100.00. Called LMC and they are checking their stock and seeing if they all are 1 row. My question is where did you get your radiator from? Since you say its bigger than stock, does that mean you had a 1 row from factory on yours? Thanks

[uwntsumrtII]

to my understanding they are all one row. i had a 1" core and went with a 1.5" core.

[Bos-R/T]

to my understanding they are all one row. i had a 1" core and went with a 1.5" core.

This is my factory radiator. Its 1-3/4" wide. I cant find anothr one as big but from the dealer.
http://i847.photobucket.com/albums/ab32/bobradley4/IMG_0869.jpg

[ddrango]

25 A fuse will not be sufficient, I blew them twice. 30 A is just fine! :biggthumpup:

[Five9Dak]

When you get the earlier trucks figured out, I want a set.

[rattler360]

whats the part number from mopar on the fan

[uwntsumrtII]

Cbg4f250

[mtlcafan79]

Speaking of part numbers, WTF headlights/fogs are you using? Freakin' laser beams? Those things are bright.

[1evilrt]

Speaking of part numbers, WTF headlights/fogs are you using? Freakin' laser beams? Those things are bright.LOL, he let out his secret at the nats!!!!!!!!!!!!!!!!!!!!!! Thos shits are effn bright! And by the way the install of the fan up close is friggen awesome, looks like it should be an OEM piece!

[uwntsumrtII]

Speaking of part numbers, WTF headlights/fogs are you using? Freakin' laser beams? Those things are bright.

http://www.hidkitswarehouse.com/hidshop/

[sunike32]

Speaking of part numbers, WTF headlights/fogs are you using? Freakin' laser beams? Those things are bright.

LOL I had Rob turn them on one night when we were hanging out in the parking lot. They lit just about that entire field right up. I had been waiting to buy HIDs because I had no idea how they would work in the diamond clear housings, but Rob's look awesome. After seeing them I will be purchasing some soon...

[mtlcafan79]

Bump. Any update on brackets? I ordered my fan from Dark Helmet and I'm ready to install once the brackets are ready.

[Bos-R/T]

Bump. Any update on brackets? I ordered my fan from Dark Helmet and I'm ready to install once the brackets are ready.

Has anybody made any brackets for the older trucks like yours?

[mtlcafan79]

Rob is the only person that has made any mounts with the intentions of making more. My 99 already has a Viper fan in it. This fan would be for my 03.

[Bos-R/T]

Well damn. I didnt wanna have to do it and was hoping somebody else has done it. This guy that works for me just bought a 98 dak r/t and was wanting to put the Jeep fan on it.
I will just tell him nobody, YET, that I know of has made the brackets for his model truck. Im sure somebody will one day.:biggthumpup:

[2k1AmberR/T]

I'd also be interested in a set...

[BryanRT360]

me too... plus that cool rubber grommet you used

[RobbyD]

me too

[ScojoDak]

Update?

[WhiteRT]

FUCKING BUMP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[BluRT00]

NYUK NYUK NYUK.....NYUK :jester: