anyone delete their a.c?

[badinfluence]

What belt are you using without the compressor there?

[BryanRT360]

i used a belt from a 2000 ram w/o ac

[badinfluence]

I did not know they made any without the ac.
Thank you very much.

[BluRT00]

I ran into this earlier this year. I run a Napa Belt# 25 070896, boils down to a 90 inch belt. Another part number for Gates belts is GATES Part # K070896.
AC-Delco part number ACDELCO Part # 7K896. Good luck and enjoy, this only works with the stock A/C compressor bracket still in place. :biggthumpup:

[BryanRT360]

I did not know they made any without the ac.
Thank you very much.

that will only work with the non a/c bracket. if you still running the a/c alt bracket the length's are different. refer to blues post

[badinfluence]

As i look at it,it seems as it would be a bigger pita to take it off,so for the time being,I guess ill just leave it on.
Thanks for those part numbers.

[Pete102580]

i think it took me all of 15 minutes to take the a/c out. it's easy.

pete

[badinfluence]

The only problem I am having getting it out is the on and off rain storms today.
Just don't feel like fuckin with that bracket right now.

[Adobedude]

i think it took me all of 15 minutes to take the a/c out. it's easy.

pete

Did you take all of it out?

http://www.nmbuilder.com/gutted.jpg

[badinfluence]

LOL,but did you do that in under 15 minutes?

[BluRT00]

Like Pete said takes about 15 mins to pull the compressor and lines under the hood.

[badinfluence]

From start to finish it took me about an hour due to rain.
I just did not understand the relevance of his post since all I asked about was a belt size.