Pics of my recent build .. still working out the bugs

[blownRT]

http://i782.photobucket.com/albums/yy103/caseypoche4132/002.jpg- Bare block (bored .030 over)

http://i782.photobucket.com/albums/yy103/caseypoche4132/005.jpg- Forged SRP pistons w/valve reliefs

http://i782.photobucket.com/albums/yy103/caseypoche4132/020.jpg-stock crank being torqued down (85 ft lbs i think)

http://i782.photobucket.com/albums/yy103/caseypoche4132/017.jpg-1 piston in

http://i782.photobucket.com/albums/yy103/caseypoche4132/018.jpg-gettin there .. got a 6 pack lol

http://i782.photobucket.com/albums/yy103/caseypoche4132/022.jpg-about to check ptv clearance

http://i782.photobucket.com/albums/yy103/caseypoche4132/023.jpg-mopar performance heads (2.02/1.60)

http://i782.photobucket.com/albums/yy103/caseypoche4132/025.jpg-hs 1.6 roller rockers

http://i782.photobucket.com/albums/yy103/caseypoche4132/026.jpg-imho they are sexy

http://i782.photobucket.com/albums/yy103/caseypoche4132/060.jpg-believe it or not guys .. dakota's can bleed

http://i782.photobucket.com/albums/yy103/caseypoche4132/037.jpg-engine making its way back to its home :rockwoot:

http://i782.photobucket.com/albums/yy103/caseypoche4132/067.jpg-enigne way too high for me.... i was shitting on myself ... if that would have fell ...omg

http://i782.photobucket.com/albums/yy103/caseypoche4132/053.jpg-engine sat in pretty nice (not the best spot for me to be) :nono:

http://i782.photobucket.com/albums/yy103/caseypoche4132/069.jpg- little sis even helping make sure the wiring harness doesnt get f-ed

http://i782.photobucket.com/albums/yy103/caseypoche4132/007.jpg-cam sheet



ight guys .. hope yall like

[blownRT]

before i get reemed for the tb spacer it was a freebie so i just put it on lol ... cant hurt and it weighs nothing so .. why not

[RTZoD]

You have a pn for those heads? And how much were they? Were they assembled with valves and springs? I am already looking into the future..... I've been wanting to do something next tax season.

[grapejuice1998]

before i get reemed for the tb spacer it was a freebie so i just put it on lol ... cant hurt and it weighs nothing so .. why not

I was gonna ream you for the needle scale torque wrench.
You might as well rely on your calibrated arm!

[blownRT]

yea i have a part number it's p5153847 and the torque wrench was my dads .. yea i know its old school lol but it seems to work fine .. nothing locked up or came lose yet lol..

[bfranzel]

I was gonna ream you for the needle scale torque wrench.
You might as well rely on your calibrated arm!

i was thinking the same thing. imo you were better off using the same vein in your left arm like rtzod:jester:

[blownRT]

Lol .. The first time I saw that about the same vein in his left arm ... I laughed so damn hard ..

[Adobedude]

before i get reemed for the tb spacer it was a freebie so i just put it on lol ... cant hurt and it weighs nothing so .. why not

I'm gonna give ya shit for letting the girl (wife?) get so tan....LOL

My wife, CA blond lived in the sun, Tanning was everything, and damn she looked good. Guess what...Skin Cancer, sliced and diced front and back, thank God the best plastic surgeon in town did her face, no scares at all, but she had 30 stiches.

OUCH!

[grapejuice1998]

I'm gonna give ya shit for letting the girl (wife?) get so tan....LOL

My wife, CA blond lived in the sun, Tanning was everything, and damn she looked good. Guess what...Skin Cancer, sliced and diced front and back, thank God the best plastic surgeon in town did her face, no scares at all, but she had 30 stiches.

OUCH!

Read captions much? :jester:

[Adobedude]

Read captions much? :jester:

I just look at the pics...Guys don't read... :nono:

[grapejuice1998]

Lol .. The first time I saw that about the same vein in his left arm ... I laughed so damn hard ..

I woulda laughed, but what popped into my head first was; is he really quoting himself in his sig?

[Sick 660r]

nice build.

When checking for valve clearance use molding clay instead of play doh.

[blownRT]

That's all u had around at the time lol ... It worked pretty good ... I spread a little oil on top of the play doh and turned ut over ... I got like 3/16" of clearance on the valve reliefs.

[Kota408RT]

That's all u had around at the time lol ... It worked pretty good ... I spread a little oil on top of the play doh and turned ut over ... I got like 3/16" of clearance on the valve reliefs.

Didn't know there was another RT close to Baton Rouge.. They seem to be pooping up alot in LA now

BTW nice build, should have cleaned the oil pan tho :p

[2k1AmberR/T]

They seem to be pooping up alot in LA now

R/T's do tend to poop a lot.

[RTZoD]

I thought it was a funny line.. I thought it was weird to quote myself but I didn't want to let it get lost in the posts.

[grapejuice1998]

I thought it was a funny line.. I thought it was weird to quote myself but I didn't want to let it get lost in the posts.

Just erase the "originally posted by RTZoD" part and I would have never known the difference.

[blownRT]

yea oil pan is kinda nasty but hopfully no one will see it (flip my truck) lol,

[blownRT]

yea i know of 4 or 5 other r/t's around here other than mine .. all around gonzales/prairieville area