Activity Stream

One on the right is familiar.

Thanks guys ! Of course I will share more vids !

Keep the updates coming!

Does the one on the right look familiar? The left should be 99

I did not have the factory supplemental cooler. What I did though was to bypass my radiator trans cooler and installed a plate cooler under the...

You know what becomes a problem with this Justin, when trying to use one of those head gasket leak indicators, they're supposed to be raised enough...

Pre-'00 had the cap on the radiator, but there were a few guys back in the day that IIRC, relocated the cap/filler to the end of the hose right at...

9t9-5.2 I thought I recognized that tubing!!!! LOL!! I work in maintenance for one of the Big Three. Anyway thanks for the info, I've been running...

You have a tranny cooler attached to this radiator? I'm wondering if they configured it the same way when they changed the radiator design in 2000.

It is the factory air box with the reinforcing ribs removed from the outside of the lid and base. I wrapped it with (IIRC) DEI 1/2" reflective...

The Hellcat swap really isn't all that bad. When I did mine, Schumacher mounts were all that was available and I had to have headers built locally. ...

Hey Pat, I make the shirts that evilrt posted above. Any color combo and ccab size, $22 shipped. PM me if you're interested, I don't get on here...

Wow!! I like that cold air box!!!! How did you build it and what materials did you use if you don't mind me asking? Nice clean engine compartment...

I believe it was up to 99 had it on the radiator. Mine isn't an R/T but, they were the same.

Sup guys, just wanted to say happy new year, and I am looking forward to firing up the engine very soon! Been working hard on it and have many...

Be sure to share more fresh videos.

Looks good Ernie! :biggthumpup:

Nice! Sounds good and I like that color too.

Nice color for that vehicle BK.

Great car start!

https://youtu.be/Sz_CyivGE-s Got her back on the road after doing my rear end swap with 4.56 and a trueteac!

Robert Haun Oak Hill, fl. putting together 4.250 stroker with big port Ede. heads.

Hey Ed, I have an '01 4.7L with mods. Not familiar with your area so no recommendations on shops. However highly recommend Flyin' Ryan Tuning...

Lehigh Acres, Fl

The first cam swap I ever did was on my '01 4.7 (just threw in the HO cams at the time). Surprisingly easy job as long as the timing chain tensioners...

Specialty shop isnt needed for the installs/ fabrication. However, I would have someone thats familiar with the 4.7 to do the tuning.

Welcome! As far as an actual shop,none that I’m aware of,there is a member that checks in occasionally that has a 4.7 Dakota that he turbocharged...

There are three different return hoses. I’m not sure if my ‘01 is any different then your ‘99. If you don’t have the p/s cooler, there is a longer...