Activity Stream

Welcome . Wouldn’t worry bout exhaust. With 2 sundown 12’s 2 eights in the doors and 2 five inch kids inthe kickpanels you won’t hear the exhaust...

That's very offensive to people who fuck their cousins......... they don't sound nearly as bad as Flowmasters.

Flowmasters sound like cousins fucking, look into Hooker aerochamber, Magna flow, dyno max and spintech for exhaust and mufflers. Also, how old...

My stars are still aligning, but work and other things like Hale-Bopp Comet (Google it if you don't know) keeps getting in the way. LOL!!! Only about...

I'm pretty sure I want to build the motor that's in her already" You may want to consider Nitro's engine. It takes a ton of patience and money when...

I am not an expert with the big block RB motors but at a quick glance it appears you can get more hp out of a 440 for around the same cost or less as...

I made a heat shield that attached to the upper control arm from some sheet metal.

I'll have to go down to the "Cave" and get some pics. But, "Baby it's cold outside"! LOL

Look through the build threads forum and look for Tom Filbert's 440 swap Dakota, in all honesty it isn't worth it unless you just absolutely want a...

LS coils are gone.

I agree. Did that 5 years ago . Passed Arizona and California emissions

Schumacher Creative Services used to make a kit for it but discontinued them due to a lack of sales. I have picked up a 440 engine and 727 trans...

I agree with nitroram33. The speedometer doesn't care about the width. The tire height/diameter is what you need to consider. The nitto tires are...

The crossmember is sold, again.:jester:

Lol, those probably need to go Ryan then, forgot they came in the same box and didn't realize the mounts even had bolts with them:jester:

FWIW, the bolt package in the photo marked as DEM2 go with the motor mounts.

Sale pending

Text sent :biggthumpup:

Shoot me a text 8608060691 it’ll be easier that way

Unfortunately, not really. Shipping is about 47 bucks and the PayPal fee is 9, so there's only a little over 240 there so it's already substantially...

Any wiggle room on the price? PayPal ready.

This has only been out of the box, and has not installed. The marks in the paint are not be visible when installed. This would have been a great...

PM sent

Old thread, but I'm curious regarding the important prep you did before using that paint.

Care to share any pictures of this? You are right, I do not have the original manifolds nor their heat shields. I have an idea of what I can do....

Hey Corey, I used the heat shields off my stock manifolds to cut down. I then drilled and riveted them to the plastic inner fender. I don't know how...

So, as it turns out, the Hi-potek crossmember without the tabs won't work with a KB x-brace so it's for sale again. USPS bounced it around a little...