Activity Stream

Ok I think I figured out what I’m doing odesssa makes a eq copy with 2.02/160 built to order $1500 for the pair delivered ,eddy’s not available till...

You need flow velocity to make HP throughout the rpm range. Yes cam does effect flow and so does compression but mismatching a cam to heads thinking...

Ah ok, im kinda iffy on the last tune also but I don’t want to go back and forth again

Put a straw in your mouth to breathe through and walk around the room. Can't breathe can't function. All the new engines have much larger ports,...

The Trick flow have a 190cc intake runner, compared with the 176cc intake runner of the Edelbrock rpm head. Therefore, the Edelbrock head should...

How are these on the street Pack? Any low end issues?

I ended up buying the LM2 from Danno when he was selling all the Dak r/t stuff. I was wondering if the scangauge was reading correctly.

Done it several times.. guess I'll try again.

Hughes can drill heads for magnum intake, I was told. I think they also have the Trick Flow available. Not sure. i love my big gulp heads, 225 cc....

Pat I have my Lm2 if you need to borrow it, I’ll send it with my truck lol

I called trick flow and they said you cannot drill them but I saw a video of so keep guys that made a jig and drilled them for a magnum but now I’ll...

That would be the Mr. Gasket .028 thickness.

Yes, easier said than done. I had all those erratic idles, hanging idle, etc. I kept at it until I finally got it. Every time I changed throttle...

I’ve heard there are thinner head gaskets to use, for a slightly bump in compression

You can still get the EQ heads (But I agree w Rich that it is more of a gasket problem). All EQ heads are now coming with the 1.94 intake valve so a...

Done that a few times, seems like it takes a little bit of fine tuning even after following the procedure.

Sounds like you need to adjust your IAC counts.

If running nonadjustable 1.7 rockers, then you are stuck with the iron head. The newer EQ heads don't flow as well as the older EQ heads. The...

I did get a MSaine VB, it didn't change anything. Firmed up the shifts some, that's it. Exchanged emails with Martin, adjusted the TV cable and...

Didn't you get one of Martin's valve bodies? Have you talked to him about the issue? Having my own weird shifting issues. Always wants to idle...

Trans has been fully rebuilt with HiPo parts...still not working right. It hasn't slipped since rebuilt, the trans guys nows better to push it that...

I have 2 boxes of the copper wires, old stock silicone, still very pliable, 8 mm. keep them for projects. Years ago that's all we ran racing I'm...

Well... I've never tried it. But, you are saying it is working without radio interference? I wouldn't even know where to find a copper core ignition...

:biggthumpup::r/t smile:

When a trans. actually slips it's damaged, these transmissions are computer controlled, your tuner should be able to adj. the RPM's the trans shifts...

This is a good transmission troubleshooting guide. Hope you get it figured out Mike. ...